Does the 12-1 remove acrylic engraving odor?

Yes. The 4-stage filtration — mesh, ESP cell, 3× UV lamps, and activated carbon plate — removes 96–99% of odors from fiber and UV marking and acrylic engraving.

How often do I wash the ESP cell?

Every 1–3 months under normal use. Wash with warm water and a degreaser, then let it dry completely before reinstalling.

Is the 12-1 airflow adjustable?

Yes. The touch panel provides adjustable airflow and a filter replacement indicator.

12-1 ESP Fume Extractor for 6040 & 6090 Laser Engraving & Marking

Name: 12-1 ESP Fume Extractor
Brand: Reborix
SKU: RBX-12-1

Reborix 12-1 Compact Marking Fume Extractor

Best Seller · Marking Specialist

Model 12-1 — Compact Marking Extractor

Purpose-built for fiber, UV, and green laser marking machines. Ultra-quiet operation lets it sit directly beside the workstation — even in office-adjacent environments.

500 m³/h airflow | 0.9 kW (500 W fan) | 55 kg
4-stage filtration: Stainless Mesh + ESP Electrostatic Cell + 3× UV Lamps + Activated Carbon Plate
≤65 dB noise — quieter than a standard office conversation
400×505×940 mm footprint — fits beside any marking workstation
Captures 99.97% of particles down to 0.1 μm — removes 96–99% of odors
Touch panel with filter replacement indicator and adjustable airflow
CE certified | 12-month warranty

Get Quote → Get a Recommendation →

Which Machines Does the 12-1 Serve?

6040 / 6090 CO₂ Lasers

The standard match for desktop CO₂ engraving and cutting machines — acrylic, rubber, and light wood fume.

Fiber / UV / Green Markers

Purpose-designed for fiber, UV, and green laser marking machines that produce fine oily fume standard HEPA filters clog on.

Soldering & Welding Fume

Also handles soldering and small welding workstation fume in electronics and jewelry settings.

12-1 Full Specifications

Specification	Value
Model	RBX-12-1
Filtration type	Washable ESP (electrostatic precipitation)
Airflow	500 m³/h
Noise	≤65 ±5 dB
Power	0.9 kW (500 W fan)
Dimensions	400 × 505 × 940 mm
Weight	55 kg
Inlet	Ø100 / 120 / 150 mm
Outlet	Ø120 mm
Voltage	220 / 230 / 110 V · 50/60 Hz
Certification	CE (Machinery, LVD, EMC)
Warranty	12 months

4-Stage Filtration, Layer by Layer

Primary stainless steel mesh filter — catches coarse particles
Electrostatic (ESP) module — captures 99.97% of particles down to 0.1 μm (washable)
3× UV lamps — break down VOCs and sterilize the airflow
Activated carbon plate — removes 96–99% of odors and gases

Maintenance & Cleaning

Pre-filter mesh: wash every 1–2 weeks
ESP module: wash every 1–3 months with warm water and an alkaline degreaser
Activated carbon plate: replace every 12–18 months

⚠️ Important: After cleaning, allow the ESP module to dry completely before reinstalling and operating the machine. Installing a wet or damp ESP module may cause electrical short circuits or equipment faults.

See the full maintenance & cost schedule and our step-by-step ESP cleaning guide.

Common Questions

What laser machines does the 12-1 fit?
6040 and 6090 CO₂ lasers, plus fiber, UV, and green laser markers and low-power engraving machines.

Does it remove the smell from acrylic engraving?
Yes — the ESP cell plus 3× UV lamps and activated carbon plate remove 96–99% of odors.

Is the airflow adjustable?
Yes, via the touch panel, with a filter replacement indicator.

How quiet is it?
≤65 dB — quieter than a standard office conversation, so it works beside office-adjacent workstations.

What about CE and warranty?
CE certified with a 12-month warranty. Documents available on the Downloads page.

Get a 12-1 Recommendation

Tell us your machine and material — we'll confirm the 12-1 is right for you and send pricing within 24 hours.